Interpreting the derivative: rates and units

Lessons and exercises follow the school system and stay in its language.Les leçons et les exercices suivent le système scolaire et restent dans sa langue.Lektionen und Übungen folgen dem Schulsystem und bleiben in seiner Sprache.

About this lesson

Calculus AB (AP-aligned) › The derivative

To save a PDF, choose “Save as PDF” in the print dialog.

Sources and credits

Written with this source as a starting point:

sedifier rewrote the text and added its own examples and exercises.

Written with AI assistance; every answer is checked by our math engine. Not yet reviewed by a teacher.

This lesson: CC BY-SA 4.0, © sedifier · All credits

Interpreting the derivative: rates and units

The derivative.

Warm-up

Three quick questions from earlier lessons.

  1. f(x)=x2+2xf(x) = x^2 + 2x. Use f′(3)=lim⁡h→0f(3+h)−f(3)hf'(3) = \displaystyle\lim_{h \to 0} \dfrac{f(3 + h) - f(3)}{h} to find f′(3)f'(3).
  2. Which expression is f′(2)f'(2)?
    1. lim⁡h→0f(2+h)−f(2)h\displaystyle\lim_{h \to 0} \dfrac{f(2 + h) - f(2)}{h}
    2. lim⁡h→0(f(2+h)−f(2))\displaystyle\lim_{h \to 0} \big(f(2 + h) - f(2)\big)
    3. f(2+1)−f(2)1\dfrac{f(2 + 1) - f(2)}{1}
    4. f(2)f(2)
  3. f(x)=3xf(x) = \dfrac{ 3 }{x}. Use the limit definition to find f′(2)f'(2).

Discover

T(m)T(m) is the temperature of a cup of coffee, in °F, mm minutes after it is poured. T′(10)=−2T'(10) = -2. What are the units of −2-2?

  1. °F per minute
  2. °F

Key idea

A derivative is a rate, with units.

If f(x)f(x) is measured in output units and xx in input units, then f′(a)f'(a) is in output units per input unit. f′(a)=rf'(a) = r means: at x=ax = a, ff changes by about rr for each extra unit of xx.

Worked example

Interpret T′(10)=−2T'(10) = -2.

Ten minutes after it is poured…
Input 10 minutes, output a rate in °F per minute.
…the coffee is cooling by about 2 °F per minute
Negative: the temperature goes down.
So T(11)≈T(10)−2T(11) \approx T(10) - 2
A rate lets you estimate a small change.

Your turn, guided

Your turn: s(t)s(t) meters, tt seconds. s(4)=30s(4) = 30 and s(4.5)=34s(4.5) = 34.

s′(4)≈34−300.5s'(4) \approx \dfrac{34 - 30}{0.5}
4 meters in 0.5 seconds.
s′(4)≈8s'(4) \approx 8 m/s
4 ÷ 0.5.

Practice ★

  1. V(t)V(t) is the volume of water in a tank, in liters, tt minutes after a tap is opened. V′(2)=8V'(2) = 8. What does this mean?
    1. At t=2t = 2 min, the volume is increasing at about 8 liters per minute.
    2. After 2 minutes, the tank holds 8 liters.
    3. In the first 2 minutes, 8 liters flowed in.
    4. It takes 8 minutes to add 2 liters.
  2. V(t)V(t) is the volume of water in a tank, in liters, tt minutes after a tap is opened. V′(7)=11V'(7) = 11. What does this mean?
    1. At t=7t = 7 min, the volume is increasing at about 11 liters per minute.
    2. After 7 minutes, the tank holds 11 liters.
    3. In the first 7 minutes, 11 liters flowed in.
    4. It takes 11 minutes to add 7 liters.
  1. C(q)C(q) is the cost, in dollars, of making qq bikes. What are the units of C′(125)C'(125)?
    1. dollars per bike
    2. dollars
    3. bikes per dollar

Watch out!

Practice ★★

  1. A car's position is s(t)s(t) meters after tt seconds. s(2)=31s(2) = 31 and s(2.5)=39s(2.5) = 39. Estimate s′(2)s'(2), in m/s.
  2. A car's position is s(t)s(t) meters after tt seconds. s(14)=239s(14) = 239 and s(14.5)=256s(14.5) = 256. Estimate s′(14)s'(14), in m/s.
  3. A car's position is s(t)s(t) meters after tt seconds. s(4)=34s(4) = 34 and s(4.5)=38s(4.5) = 38. Estimate s′(4)s'(4), in m/s.

Exit ticket

Three questions to check you have got it.

  1. V(t)V(t) is the volume of water in a tank, in liters, tt minutes after a tap is opened. V′(2)=8V'(2) = 8. What does this mean?
    1. At t=2t = 2 min, the volume is increasing at about 8 liters per minute.
    2. After 2 minutes, the tank holds 8 liters.
    3. In the first 2 minutes, 8 liters flowed in.
    4. It takes 8 minutes to add 2 liters.
  2. V(t)V(t) is the volume of water in a tank, in liters, tt minutes after a tap is opened. V′(7)=11V'(7) = 11. What does this mean?
    1. At t=7t = 7 min, the volume is increasing at about 11 liters per minute.
    2. After 7 minutes, the tank holds 11 liters.
    3. In the first 7 minutes, 11 liters flowed in.
    4. It takes 11 minutes to add 7 liters.
  3. V(t)V(t) is the volume of water in a tank, in liters, tt minutes after a tap is opened. V′(3)=19V'(3) = 19. What does this mean?
    1. At t=3t = 3 min, the volume is increasing at about 19 liters per minute.
    2. After 3 minutes, the tank holds 19 liters.
    3. In the first 3 minutes, 19 liters flowed in.
    4. It takes 19 minutes to add 3 liters.

Summary card

Reading a derivative

  • Units: output units per input unit.
  • f′(a)=rf'(a) = r: at x=ax = a, ff changes by about rr per extra unit of xx.

Watch out: f′(a)f'(a) is a rate at one moment, not a value and not a total change.

One more step is optional: a challenge. Try it, or finish the lesson now.

Challenge ★★★

  1. C(q)C(q) is the cost in dollars of making qq bikes, and C′(100)=22C'(100) = 22. About how much does the cost rise when 108 bikes are made instead of 100?
Sources and credits

Written with this source as a starting point:

sedifier rewrote the text and added its own examples and exercises.

Written with AI assistance; every answer is checked by our math engine. Not yet reviewed by a teacher.

This lesson: CC BY-SA 4.0, © sedifier · All credits